P39: Exp. Digital I/O
Expansion module
16 IN + 8 OUT digital fast optoisolated
IPC bus
16 IN + 8 OUT digital fast optoisolated
IPC bus
- Expansion module, applicable to all pre-set boards (e.g. with: P37, P38), allowing 16 inputs + 8 opto-isolated digital outputs to be added.
- These I/O are "fast" because they are handled directly by the host board's microprocessor.
- The opto-isolation of the signals allows galvanic isolation from the "field", thus ensuring maximum protection against interference and accidental failure.
- The solid-state components used for the output stages provide protection against short-circuits, over-temperatures due to excessive dissipation and reversed polarity of the external supply voltage.
P39: Exp. Digital I/O
Expansion moduleproduct information
- 16 PNP opto-isolated digital inputs (24 Vdc nominal).
- 8 PNP opto-isolated digital outputs (24 Vdc nominal).
- 1 pin shared programmable input/output (I/O).
- Each output can supply (current source) a maximum current of 500 mA.
- Format 100 x 120 mm.
- Front Panel: 4 TE.
- 1 DIN 96-pole male connector.
- 1 x D-SUB 25-pin male connector.
- Consumption :
- 20 mA on +5 Vdc (from host board);
- xx A on +24 Vdc (field power supply).
- Input absorption: 12 mA at 24 Vdc.
- Field alim.range: 15..30 Vdc.
The EXPANSION module is automatically recognised by the management library of the board on which it is mounted.