P09: Digital I/O
16 IN + 16 OUT digital optoisolated
IPC bus
IPC bus
- 16 digital inputs + 16 digital outputs, can be inserted into a slot of a Leomatic system with IPC bus.
- The opto-isolation of the signals allows galvanic isolation from the "field", thus ensuring maximum protection against interference and accidental failure.
- The solid-state components used for the output stages provide protection against short-circuits, over-temperatures due to excessive dissipation and reversed polarity of the external supply voltage.
- Up to 16 P09 boards can be installed simultaneously (addressable by jumpers), for a total of 256 inputs + 256 outputs.
P09: Digital I/O
16 inputs + 16 digital outputsPRODUCT INFORMATION
- 16 PNP opto-isolated digital inputs
- (24 Vdc nominal).
- 16 PNP opto-isolated digital outputs
- (24 Vdc nominal)
- Each output can supply (current source) up to 500 mA
- EUROCARD format 100 x 160 mm.
- Front Panel: 4 TE.
- 1 DIN 96-pole male connector.
- 1 x 37-pin D-SUB female connector
(for connection to physical I/O and field power supply).
Consumption:
- 120 mA on +5 Vdc (from IPC bus) xx A on +24 Vdc (field power supply).
- Input absorption: 12 mA at 24 Vdc.
- Field alim.range: 15..30 Vdc.
It can be managed by any application SW, via direct access to the 2 I/O ports (16 bit read + 16 bit write).
- P16: Digital I/O for ISA bus.
- P59: Remote digital I/O for DIN rail.